The models 900 VS and 900 VSX are Onsrud's finest Inverted Routers™, ruggedly built for continuous production duty under severe conditions for up to three shifts per day. Both are capable of plunge routing and profiling both inside and outside cuts in hardwoods, softwoods, man-made woods, non-ferrous metals, aluminum, and a variety of plastics and composites. Only the very best components are incorporated into these tough, dependable machines, assuring you many years of precision performance.
With the correct tooling and a properly made template these models are capable of cutting up to 1" hardwoods and 2" softwoods in one pass. If desired, the turret style depth stop may be used for cutting material in multiple passes to reduce feeding effort required.
The 500 SS C.R. Onsrud Inverted Router features a cast iron overarm, machine frame and spindle mount, along with hardened steel spindle slides resulting in a rigid, accurate machine. The model 500 SS is built to the same high quality standards as the larger, award winning 900 series Onsruds. The model 500 SS produces better quality work up to ten times faster than with a band saw, scroll saw, or hand router, and is more versatile than the conventional table routers. The retracting cutter and guide pin allows easy and fast plunge capability and less cutter exposure. The overhead guide pin means no need for expensive "bearing tools" with their inherent performance and safety problems.
Model Number | 900VS | 900VSX |
---|---|---|
Throat Depth | 36in (914 mm) | |
Table Size | 47in x 31in (1200 mm x 800 mm)* | |
Maximum Workpiece/ Template Height | 4in (100mm) | |
Dust Collection | 4" (100 mm) outlet, 500 CFM (2000 m3/h), | |
Compressed Air | 80 psi (6 bar), 4 CFM (150 liters/minute) | |
Motor | 10 horsepower, 3-phase | |
Spindle Speed | 9,500-20,000 RPM (based on pulley) |
1,000-21,000 RPM (Variable Speed Control) |
Shipping Weight | 2000 lbs (907.2 kg) |